Saturday 6 August 2011

August update

July Has been a great month it`s been my birthday and my wonderful wife and family bought me some great gifts for the cobra. my wife found me an old motalita wood rim steering wheel from around 1985 brand new but it has been sat in an office for all that time so its kind of bleached the wood looks great, the girls also bought me a gear stick from Europa , I've also finished the gearbox tunnel so it was great to get the steering coll um in to fit the wheel and plonk the gear stick on.


The next job on the list was the pedal box i really didn't like the design of the dax one so i decided to fit a race style pedal box but of course it also needed some perfecting as you can see from the pictures i cut down the pedals as they were too tall. added a left foot rest and put some extra strengthening along the front. and also fitted the ac pedals ( i think they will have to come off for the IVA Test) but they do look great




  also managed to get the steering collum fitted and welded up so the steering now works unfortunately the steering collum has a slight bend in it so i will have to find a new one before the test what a pain but it was cheap i should have asked more questions i think.


 still more to go this time like i say been a great month for the build. Now that the mechanical parts of the chassis and body are fitted i have decided to start on with getting the body prepared ready to paint i plan to do this over Xmas this year so I've got a few months now of fitting doors and filling in holes and getting door gaps perfect, i have made a start today on the doors i have got both sides fitted bit of a pain job but not too bad in the end. I'm really glad you wont see the hinges in the finished product they would be perfect for a tractor. LOL



 That's it for this build update next time i should have all the panel work on and i will be filling and sanding now till the cows come home. (off to Prescott hill climb tomorrow to watch the VSCC members race up the hill)

Friday 8 July 2011

very excited update

Had a bit of an exciting day today. the webbers arived for the engine although im not ready to build the engine yet i did need the gear box and engine back in the car so the wiring can be finalised and to see if the bonnet fits and all the plumbing so this afternoon i have quickly thrown the engine together and got it back in the car.
  enjoy the pics i think they look great




Thursday 7 July 2011

May 2011 Update

Well What can i say its already may, time just disapears when your having fun. its has been a rather hard month on the build front i have spent the entire month well saturdays anyway cladding out the engine bay as you can see i had to get the team in to get the job done.

 Below is a selection of pics to bring you up to day


 Emily helps with the engine bay





Now that the engine bay is finally finished its time to move onto replacing the gearbox tunnel, i have decided to make it completly removable so i can get to the gear box and rear brakes and diff if i ever need to.
 As you can see below i have droped the gear box back in so i can line up where the shifter comes through



Well thats all for now will be back soon with another update 

Sunday 24 April 2011

April build update 2

Back again for another update had rather a productive month, after altering the body to suit the new vents i have been working on the engine bay so that i can fit the vents in properly. i am in the very fortunate position that i have access to an original cobra from time to time so i am able to take plenty of pictures and just make sure I'm being as correct as possible unfortunately the car is a MK 1 with a Ford 289 but still has many of the same features as the later 427 that I'm trying to recreate.
 As you can see from the picture below the top of a cobra foot well is white and is made of fibreglass my next job in the engine bay was to recreate this.  

Real Cobra Engine bay



Unfortunately the dax footwell is not sloped as it is in the real thing but i can at least get the right look with in reason, the gel coat on my body was in no way good enough to just paint white so i had to make some aluminium panels to go on to the top and then give them a lick of paint.

The panels in primer

The finished items



Hopfully as the engine bay progresses with the aluminium cladding as it were, they should begin to look as close as possible to the picture above of the real thing, I even intend to fit a reproduction chassis plate.

 The next stage was to make 2 cover plates to go over some extensions in the side of the footwell pod the reason they are there is so the top of the foot well can be angled to give a little room for the headers i think but anyway another of those really tricky jobs but i think the out come will be really nice when the panels are fitted over the top and riveted into place .

The panels ready to go in the car

The finished item

 As you can see a small amount of welding was required on these panels but most of the rest will be riveted just as an original would have been.

 Time to get started with the main panels in the front of the engine bay now this will be a long process as i will have to make templates for all the panels as I'm going along then cut the aluminium then fold it shape it glue it with tiger seal and then finally rivet the panels together.

Template being made

The first of the panels gos in to the car

The finished passenger side

The finished drivers side

 I think so far this looks really great a huge amount of effort to make all these panels,you can buy them from dax but 1 they are stainless so not correct cobras were aluminium and 2 they cost £560 plus vat. so far i have bought 2 8x4 sheets of 16 gauge aluminum delivered with the vat was only £117 quite a difference and i think the effect of the rivets is awesome .

 i plan to get more panel work done this Friday so i will try and get another update done asap

April Engine update


Very exciting my new well second hand heads have arived and the very butiful inlet manifold ready for the quad IDA Webbers carbs. Cant wait for the rest 




April Build update




April Already i don't think I'm going to be finished by the summer. LOL

 Now that the body is on the chassis and all glued and bolted down its time to get on with fitting out the car i am starting with the outside getting all the doors fitted bonnet boot side vents and so on, this is so that all the holes can be cut in the fibre glass,  then as I'm going along i can put the aluminium paneling over the top to create the look I'm wanting, although i will be concentrating with the out side I'm going to be lining out the engine bay the boot and the gear box tunnel as part of this stage.

 Below is a picture of the two side vents i have bought they are a recreation of an original set of vents made/sold by Europa spares i decided that i didn't like the dax option so i went for the more original look.

Cobra side vents



Vent opening

As you can see from the picture above dax have very nicely shaped an opening for you to fit a stainless item straight into but as i have already said i decided i liked a more original look.




To be able to fit the new vents I had to cut out the return from the fibre glass and then add some new fibre glass to make the hole 2/3mm smaller.
  This was made even harder by the two sides of the body not being equal inside the engine bay so on one side i have had to cut out some of the wheel arch and on the passenger side i have had to cut away some of the foot well so a few repairs will have to be done the strengthen the body back up before the IVA Test.


The next stage was to use some filler to fill in the gaps both on the inside and out that the fibreglass doesn't get perfectly smooth, at this stage it is worth noting that i needed to sand both inside the body as well as the out side,the aim is to get a very thin area for the vent to sit in side of the body, because I'm trying to get an original look it was important to remember that the real cobras vent were fitted in much the same way but they were up against the inside of an aluminium panel not a fibre glass one it is there for impossible to get the fibre glass as thin as the aluminium would have been but you can get a reasonable finish if you take your time.
 using a template to mark out where the vent will fit and of course the size the hole need to be taken out to leaving just enough so the vent sat just nice and flush with the inside edge.


Finished hole ready for paint

All primed up ready for the vent.




 Vents are finally ready to be fitted they will eventually be held in place by the panelling in side the engine bay, as I'm sure you will agree i think they were worth all the hard work they look awesome and when they are painted i think they will look even better.

Saturday 12 March 2011

March Build update

Its has been some time since my last update on the blog rather lazy I'm afraid on this front, but the COB is coming along nicely since last time i have completed the chassis with all the brake lines. below are some pics of the chassis so far.
Front over view with Brake lines installed

Front right Corner

Rear Brake assembly with first remote bleed nipple fitted

 As you can see from the shots above i think the calipers look great now there all plumbed in, i have add some remote bleed nipples which i intend to fit in the boot to make bleeding the rear brakes much easier.

Its time to fit the body


The body Has arrived 20 years out in the weather has not improved the colour


Body on the chassis wow that's heavy

Me And Ashley one of the helpers enjoying a brew

That brings us up to date for now i will add some more detail as i go along 

Monday 3 January 2011

Rear suspension fitting

Another really great day on the progress front today i have been fitting the rear suspension starting with the rear wish bones and torsion bars.

Fitting the first Wishbone a little help required from my trusty second pair of hands or it might be my stool, this really was quite a challenge i seemed to need about 4 pairs of hands to get all the spacers and rubber seals etc etc in place.

Second wishbone goes on again with my second pair of hands in assistance.

Torsion bar in place

Here is a picture of me lining up the rear shocks unfortunately the top mounting were not on the same centres as the bottom mountings so i have had to space the shocks out on the pins every thing seems to function OK but i think i will need to phone dax to check that i have assembled it all correctly, all seem fine when referring to both the jag manual and the build manual but i still think i will check to be on the safe.

Picture of the rear all built up with the shocks on and the anti spread plate for the fulcrum pins which i also made today.



 As i said above a real jump forward today getting all the rear suspension parts fitted hop fully i should get the drive shafts back from chard and sons and the brake callipers are being picked up tomorrow to go and be reconditioned.
 once all the rest of the bits arrive i can finally finish the rolling chassis(i dont half wish i had just bought a new one from the factory)

Saturday 1 January 2011

Diff rebuild and fitting 28.12.2010

After having had a great Christmas definitely one of the best yet, i managed to find some time to get back to working on the Cobra. this time i have been working on the rear diff below are some pics and progress reports.


 Above is a picture of the diff all laid out after painting and cleaning, it certainly looks better than it did a few months ago. as you can see its already to go back together now.


Out drive after rebuild (sorry about the picture)


Diff in the vice

final check of the internals



As you can see from the pictures above the diff is now completely rebuilt and i am fitting it to the chassis. while fitting the diff to the chassis you have to also align the fulcrum shaft mounting brackets to give perfect alignment in the the chassis mounting tubes. at the same time you must also shim the brackets to give you the correct amount of toe in for the rear wheels this is done with some slide in shims (from the Jag).

 i suggest you make your own new ones i think the jag ones will fall out should the bolt decide to undo slightly.
 I decided to make some from some very thin sheet aluminium i had lying around , i cut 4 or so squares out of the sheet about 50mm x 50mm then trapped one side in the vice and the other side with a clamp so i could drill all the shims at once i then cleaned up the shims to the shape a size i wanted this way they won`t fall out should the bolt loosen(in the jag they are prone to come loose).



Once all the shafts are lined up and the shims fitted you can torq up all the bolts with some blue lock tight, now all the bolts are in and tight time to lock wire (Another new skill i`ve had to learn) hop fully the picture above shows the lock wiring on the fulcrum brackets and the bolts holding the diff to the top of the chassis boss, it is important the lock wire is done correctly it should at all times work as if to tighten the bolts so be sure the wire runs the correct side of the bolt/bolts.

 Next job will be fitting the bottom rear wish bones, unfortunately I'm still waiting for the front a rear callipers to be reconditioned and the gasket for the diff so the diff will be open for a while but i can still carry on with other jobs.